Yesterday I shared with you that I made a mold out of an antique metal applique. Today I tried to make two castings that are drying at this very moment. I'm not sure they are going to work though. I used paper clay, and I'm not sure that will be any better than plaster of Paris. The appliques I have been using are durable enough to hold up outdoors. The mold is good, but maybe I will try some Sculpey to create another casting.
If any of you have some ideas, please let me know. I will not give up on this process and will keep you posted. The paper clay takes one to three days to cure.
The top of my casting has some nice detail, but I think the applique I was trying to duplicate is warped and the bottom did not turn out well at all.
Friday, November 16, 2012
Thursday, November 15, 2012
Mold Making 1
I love to use appliques on my signs and furniture because I love French inspired pieces. My usual source for purchasing my appliques is drying up and although I can find them on line, they are much more expensive than I usually want to pay and since my items are for sale, and I need to watch my cost of goods.
I've been searching and searching for a way to make my own molds, then finally, this week I found a product made by Sculpey that claims to make molds in minutes so I thought I would give it a try.
I have this metal applique that is heavy and beautiful so I thought I would start with that.
I rolled out the clay and pressed the applique into it.
I baked it in a toaster oven according to the directions. The white powder you see on it is the talc that I poured over the applique so it would not stick to the clay. I'm sure that won't bother my end product. My next step is to attempt to mold clay into this and make a casting. I'll let you know how it comes out in another post.
Thanks for stopping by. I'll keep you posted on my progress.
I'm partying at...
Mondays Le Chateau des Fleurs The Graphics Fairy
Between Naps on the Porch Metamorphosis Monday
Tuesdays Knick of Time Coastal Charm
Boogie Board Cottage A Stroll Thru Life
Cozy Little House Tweak it Tuesday
Wednesdays Savvy Southern Style
Thursdays The Shabby Creek Cottage No Minimalist Here
Between Naps on the Porch Tablescape Thursday
Rustic Restorations Homespun Happenings
Fridays French Country Cottage My Romantic Home Miss Mustard Seed
Potpourri Friday Common Ground
The Charm of Home Rooted in Thyme
Saturdays Funky Junk Interiors
Sundays My 1928 Charmer Sunday's Best
I've been searching and searching for a way to make my own molds, then finally, this week I found a product made by Sculpey that claims to make molds in minutes so I thought I would give it a try.
I have this metal applique that is heavy and beautiful so I thought I would start with that.
I rolled out the clay and pressed the applique into it.
I baked it in a toaster oven according to the directions. The white powder you see on it is the talc that I poured over the applique so it would not stick to the clay. I'm sure that won't bother my end product. My next step is to attempt to mold clay into this and make a casting. I'll let you know how it comes out in another post.
Thanks for stopping by. I'll keep you posted on my progress.
I'm partying at...
Mondays Le Chateau des Fleurs The Graphics Fairy
Between Naps on the Porch Metamorphosis Monday
Tuesdays Knick of Time Coastal Charm
Boogie Board Cottage A Stroll Thru Life
Cozy Little House Tweak it Tuesday
Wednesdays Savvy Southern Style
Thursdays The Shabby Creek Cottage No Minimalist Here
Between Naps on the Porch Tablescape Thursday
Rustic Restorations Homespun Happenings
Fridays French Country Cottage My Romantic Home Miss Mustard Seed
Potpourri Friday Common Ground
The Charm of Home Rooted in Thyme
Saturdays Funky Junk Interiors
Sundays My 1928 Charmer Sunday's Best
Wednesday, November 14, 2012
Glitterfest Roses
This is a reprint of a tutorial I did last year when I was an itty bitty blogger, but I thought I would share it once again. These are roses made from coffee filters and book pages with a splash of glitter.
At the time I made these roses I was using whatever I had on hand. White paper plates would have worked better, but the base is a quartered paper plate used as a base for the rose petals. The rest of the tutorial is as it was printed in the previous post.
I used the coffee filters to come up with a pattern for the book page. The coffee filters are cut into quarters so I tried to make the width of the book petal as wide as the widest part of the quartered coffee filter. Then instead of making it a triangular shape like the coffee filter section, I made a wider base as shown in the photo. I cut a little dip in the shape because rose petals are not perfectly straight across. I outlined one side of the page petal with Tacky Glue and dipped it in silver glitter. I used German glitter I bought from an Etsy shop. It has a slight antique tarnished silver look.
Each rose needs 5 of these glittered petals.
I used white and brown coffee filters and cut them in quarters. You can cut a whole bunch at one time and separate them into a pile of white and brown petals. I started with 5 pieces of the white slightly overlapping the edges of each petal as I went in a circle. I used one of the quarter pieces of the paper plate as my base for this project. Now figure out how high you can count and that's how many hot glue sticks I used. Seriously. I used one after another after another and so on. So lay down 5 white petals in a circle using a hot glue gun. It just takes too long to use Tacky Glue for this part.
Now on top of that use 5 brown quarters and do exactly the same thing.
When that was done, I took 3 white petals and placed them in a circle on top of the brown layer. Then I took 3 brown petals and placed them on top of the 3 white petals kind of placing them in between. So now you have the plate quarter as your base and 4 layers of coffee filter petals. Understand? Now take the book page petals and fold just the base of the petal and sort of pleat from each side in. If you saw my poinsettia project it is very similar except we are not using tape. I pleated or gathered the base of the petal scrunching it in at the bottom of the petal. I stuck a glob of hot glue down and then using a thick wood skewer, I took the flat end and tamped it down after I placed the petal in place. Put down 4 book petals for this layer.
On top of that layer, I put 3 more brown petals always working in a circle. On top of the brown layer place 3 white petals. When I am saying petals, I mean the coffee filter quarters.
Now take your fifth book page petal and roll it up with the glitter side on the inside of the roll. Scrunch the bottom and make a little fold. Use the folded part to make your flower center stand straight up in the center of the flower. In other words, your flower center will have an L-shaped base. Glue that flat part of the L-shape into the center of the flower. Put another glob of glue in the middle of your flower petals and tamp your rolled up page petal into the center.
When that has been placed, take 3 more brown petals and drizzle some glue down into the base around the page petal and stuff the brown petals in. Then do this again with 3 white petals. DO NOT put the glue on the petal before you place it. You will mess up the layers you have already done. Just drizzle glue into the flower aiming for the inside base of your last completed layer. Tamp it down with the wood skewer. As you get to the last layers it is getting tighter and tighter in the center so as you place the glue and stuff the petals in you are not going to see the glue spots. They are hidden by the stuffing procedure you are doing. But the glue will hold the petal in place. Here is one of my finished roses. Believe me, it takes longer to read this tutorial than it did to make a rose. Once you start moving on this project it goes very fast.
I'm working on a new rose for this year, also made from coffee filters and I will be sharing it soon. These flowers are great for gifts, wedding decor, tree ornaments, etc. Just to add a little postscript, the book pages were from Reader's Digest pages. Each page made two petals, and as for the green paper plate, you can't even see the green when the flower is finished. Happy crafting everyone.
I'm partying at...
Mondays Le Chateau des Fleurs The Graphics Fairy
Between Naps on the Porch Metamorphosis Monday
Tuesdays Knick of Time Coastal Charm
Boogie Board Cottage A Stroll Thru Life
Cozy Little House Tweak it Tuesday
Wednesdays Savvy Southern Style
Thursdays The Shabby Creek Cottage No Minimalist Here
Between Naps on the Porch Tablescape Thursday
Rustic Restorations Homespun Happenings
Fridays French Country Cottage My Romantic Home Miss Mustard Seed
Potpourri Friday Common Ground
The Charm of Home Rooted in Thyme
Saturdays Funky Junk Interiors
Sundays My 1928 Charmer Sunday's Best
At the time I made these roses I was using whatever I had on hand. White paper plates would have worked better, but the base is a quartered paper plate used as a base for the rose petals. The rest of the tutorial is as it was printed in the previous post.
I used the coffee filters to come up with a pattern for the book page. The coffee filters are cut into quarters so I tried to make the width of the book petal as wide as the widest part of the quartered coffee filter. Then instead of making it a triangular shape like the coffee filter section, I made a wider base as shown in the photo. I cut a little dip in the shape because rose petals are not perfectly straight across. I outlined one side of the page petal with Tacky Glue and dipped it in silver glitter. I used German glitter I bought from an Etsy shop. It has a slight antique tarnished silver look.
Each rose needs 5 of these glittered petals.
I used white and brown coffee filters and cut them in quarters. You can cut a whole bunch at one time and separate them into a pile of white and brown petals. I started with 5 pieces of the white slightly overlapping the edges of each petal as I went in a circle. I used one of the quarter pieces of the paper plate as my base for this project. Now figure out how high you can count and that's how many hot glue sticks I used. Seriously. I used one after another after another and so on. So lay down 5 white petals in a circle using a hot glue gun. It just takes too long to use Tacky Glue for this part.
Now on top of that use 5 brown quarters and do exactly the same thing.
When that was done, I took 3 white petals and placed them in a circle on top of the brown layer. Then I took 3 brown petals and placed them on top of the 3 white petals kind of placing them in between. So now you have the plate quarter as your base and 4 layers of coffee filter petals. Understand? Now take the book page petals and fold just the base of the petal and sort of pleat from each side in. If you saw my poinsettia project it is very similar except we are not using tape. I pleated or gathered the base of the petal scrunching it in at the bottom of the petal. I stuck a glob of hot glue down and then using a thick wood skewer, I took the flat end and tamped it down after I placed the petal in place. Put down 4 book petals for this layer.
On top of that layer, I put 3 more brown petals always working in a circle. On top of the brown layer place 3 white petals. When I am saying petals, I mean the coffee filter quarters.
Now take your fifth book page petal and roll it up with the glitter side on the inside of the roll. Scrunch the bottom and make a little fold. Use the folded part to make your flower center stand straight up in the center of the flower. In other words, your flower center will have an L-shaped base. Glue that flat part of the L-shape into the center of the flower. Put another glob of glue in the middle of your flower petals and tamp your rolled up page petal into the center.
When that has been placed, take 3 more brown petals and drizzle some glue down into the base around the page petal and stuff the brown petals in. Then do this again with 3 white petals. DO NOT put the glue on the petal before you place it. You will mess up the layers you have already done. Just drizzle glue into the flower aiming for the inside base of your last completed layer. Tamp it down with the wood skewer. As you get to the last layers it is getting tighter and tighter in the center so as you place the glue and stuff the petals in you are not going to see the glue spots. They are hidden by the stuffing procedure you are doing. But the glue will hold the petal in place. Here is one of my finished roses. Believe me, it takes longer to read this tutorial than it did to make a rose. Once you start moving on this project it goes very fast.
I'm working on a new rose for this year, also made from coffee filters and I will be sharing it soon. These flowers are great for gifts, wedding decor, tree ornaments, etc. Just to add a little postscript, the book pages were from Reader's Digest pages. Each page made two petals, and as for the green paper plate, you can't even see the green when the flower is finished. Happy crafting everyone.
I'm partying at...
Mondays Le Chateau des Fleurs The Graphics Fairy
Between Naps on the Porch Metamorphosis Monday
Tuesdays Knick of Time Coastal Charm
Boogie Board Cottage A Stroll Thru Life
Cozy Little House Tweak it Tuesday
Wednesdays Savvy Southern Style
Thursdays The Shabby Creek Cottage No Minimalist Here
Between Naps on the Porch Tablescape Thursday
Rustic Restorations Homespun Happenings
Fridays French Country Cottage My Romantic Home Miss Mustard Seed
Potpourri Friday Common Ground
The Charm of Home Rooted in Thyme
Saturdays Funky Junk Interiors
Sundays My 1928 Charmer Sunday's Best
Tuesday, November 13, 2012
Shop Small Stores 3
"The further behind I get, the more I think I'm in front." Don't you just feel that way some days, especially around the holidays? I know I do.
In the meantime I'm still waiting for my camera charger to arrive, but you know how I feel about shopping small stores and local businesses so I wanted to share this with you just to give some food for thought. I saw this on Facebook and for some reason the whole message did not copy and paste, but the bottom line is if you agree with this concept, copy and paste it and send it along.
In the meantime I'm still waiting for my camera charger to arrive, but you know how I feel about shopping small stores and local businesses so I wanted to share this with you just to give some food for thought. I saw this on Facebook and for some reason the whole message did not copy and paste, but the bottom line is if you agree with this concept, copy and paste it and send it along.
Sunday, November 11, 2012
Aging Glass Jars
I have been admiring all the pretty altered bottles I have seen on Pinterest and on Rosemary's blog at Villabarnes so I decided to try my hand at doing an experiment of my own. I used plain jars that had been emptied and washed out so they were nice and clear. I started out by spraying the inside and the outside of the jars with clear flat spray. I used Valspar, but any matte or flat spray will work. This dried very fast. Next I took some gesso and mixed it with water, about 2/3 gesso to 1/3 water. I took a sponge applicator and started smearing the jars with the gesso mixture just blotting very gently as I went along. When this was dry, I resprayed with the clear flat.
If you follow my blog at all, you will know I have become somewhat addicted to the reverse mod podge method for transferring images. The possibilities for this transfer method are endless. It's an inexpensive method that gives a huge pay off. My kind of project. To see the tutorial for this transfer method click here. I actually have to give the credit for this idea to Rosemary at Villabarnes because she is the one that wrote about doing the transfer method on glass. I had no idea it would work on glass as well as wood.
This method of aging the glass will be blotchy. I was going for a calcified look that old glass gets when it's been left out in the rain for years. If you want a more uniform look, try Krylon's frosted glass spray. It has good sticking qualities too.
I do have some nicely shaped bottles, but first I wanted to try this method on something that was free.
I love the results. Some of the transfer rubbed off, but that just made the jars even older looking.
For the Rose jar, I actually stenciled the word rose on it. After completing the transfer method, I resprayed with the clear spray just to seal everything in.
Just to give it a finishing touch, I tied some pretty seam binding around the mouth of the jar and attached an old clip earring to finish it off.
Thanks for stopping by. I hope you have found some inspiration to try your own beautiful projects.
I'll add a P.S. to this post. I may be MIA for a few days. I left my camera charger in Napa and I have ordered a new one. A blogger without a camera is in sad shape so let's hope my new charger arrives before my battery dies. Thank heaven for Ebay.
I'm partying at...
Mondays Le Chateau des Fleurs The Graphics Fairy
Between Naps on the Porch Metamorphosis Monday
Tuesdays Knick of Time Coastal Charm
Boogie Board Cottage A Stroll Thru Life
Cozy Little House Tweak it Tuesday
Wednesdays Savvy Southern Style
Thursdays The Shabby Creek Cottage No Minimalist Here
Between Naps on the Porch Tablescape Thursday
Rustic Restorations Homespun Happenings
Fridays French Country Cottage My Romantic Home Miss Mustard Seed
Potpourri Friday Common Ground
The Charm of Home Rooted in Thyme
Saturdays Funky Junk Interiors
Sundays My 1928 Charmer Sunday's Best
If you follow my blog at all, you will know I have become somewhat addicted to the reverse mod podge method for transferring images. The possibilities for this transfer method are endless. It's an inexpensive method that gives a huge pay off. My kind of project. To see the tutorial for this transfer method click here. I actually have to give the credit for this idea to Rosemary at Villabarnes because she is the one that wrote about doing the transfer method on glass. I had no idea it would work on glass as well as wood.
This method of aging the glass will be blotchy. I was going for a calcified look that old glass gets when it's been left out in the rain for years. If you want a more uniform look, try Krylon's frosted glass spray. It has good sticking qualities too.
I do have some nicely shaped bottles, but first I wanted to try this method on something that was free.
I love the results. Some of the transfer rubbed off, but that just made the jars even older looking.
For the Rose jar, I actually stenciled the word rose on it. After completing the transfer method, I resprayed with the clear spray just to seal everything in.
Just to give it a finishing touch, I tied some pretty seam binding around the mouth of the jar and attached an old clip earring to finish it off.
Thanks for stopping by. I hope you have found some inspiration to try your own beautiful projects.
I'll add a P.S. to this post. I may be MIA for a few days. I left my camera charger in Napa and I have ordered a new one. A blogger without a camera is in sad shape so let's hope my new charger arrives before my battery dies. Thank heaven for Ebay.
I'm partying at...
Mondays Le Chateau des Fleurs The Graphics Fairy
Between Naps on the Porch Metamorphosis Monday
Tuesdays Knick of Time Coastal Charm
Boogie Board Cottage A Stroll Thru Life
Cozy Little House Tweak it Tuesday
Wednesdays Savvy Southern Style
Thursdays The Shabby Creek Cottage No Minimalist Here
Between Naps on the Porch Tablescape Thursday
Rustic Restorations Homespun Happenings
Fridays French Country Cottage My Romantic Home Miss Mustard Seed
Potpourri Friday Common Ground
The Charm of Home Rooted in Thyme
Saturdays Funky Junk Interiors
Sundays My 1928 Charmer Sunday's Best
Subscribe to:
Posts (Atom)